Видео

Amazing class,the best way to clean de dust from electronics boards,a vac with blowerport VS aircompresor with water and oil separator filter,thanks and please help me

Thanks! Fixed!

My Samsung 55 inch on/off red light indicator is blinking and will not turn on, Not sure if your still around

Thank You Sir!

Thanks for the insight. I got the no disc issue resolved by 1)gently wiping the laser with denatured alcohol. Then 2) Bringing out the cable and cleaning it with a soft eraser. The type kids use for their pencil works. Erasers do great cleaning jobs on signal cables. Cleaned and reset the cable. That just did it.

.

I have an old Walkman that has better sound quality than the crap they try to sell consumers these days. Never tried VHS, though.

Hi my tv will turn on eventually after waiting for 30 minutes unplugged, what could be the issue? change out some capacitors?

Great video! I successfully fixed my cd changer which I thought was a goner.

I just realized that the VCR mechanism is different because this version is a vcp, not a vcr. But there is an erase head in there. So I think during the late 2000s, someone replaced the VCR mechanism

Didn't need to take it apart as much as you did because taking off the face plate un-jammed the decades of dust-bunnies in my VCR Thanks Electronicle!

How do I look for someone like u in my city to fix my tv

What would you do if tv won't turn off

Hi I have a Samsung tv has no power no standby light or anything seems like a dead tv 🤦🏽‍♂️ I ordered the motherboard and power supply board still doesn’t do anything any suggestions of what it can be I will gladly appreciate it

maybe change all the capacitors? It does work sometimes.

Hoping you might have an idea for me here! My CD changer reads a lens cleaning CD with bristles on it (it plays back music while cleaning) but not my regular CDs. Any idea why this might be the case?

can you make a video about the output protections of bench power supply ? overload , short-circuit protection . thanks

Thanks for this, When I opened mine up, I saw that the rubber roller was missing. I found it in the case and that solved it for me. It doesn't seem to have anything but gravity holding onto it, so keep this puppy right side up if you can. Also a bit tricky putting front panel back on so that the VCR door opens when a tape is ejected.

Extremely useful info but tell me from where did you order your belts? I have a Sony cdp-c312m 5 disc player.

I would replace the shell at that point

What if you just change the bulb with higher lumens? Rather replacing the (resistor)?

Awful audio

Turn clockwise or anticlockwise?

Thats crazy! So I can use any old hifi vhs thing to do this?

Can you show us the schematic diagram.

Did you use a capacitor

it seems that on my thomson cd player the potentiometer is not accessible. but I'm a beginner so chances are I'm just not finding. Any hints? There's only screws holding the pieces together it seems.

DVD sounds more compressed. VHS wins.

Did this a lot in high school. My vhs deck had such a nice roll off and warmth in the low end!

"I have a Samsung like that as well, but I can only get the red light at the bottom to turn on. This happened after I connected the TV to 110V. It worked normally, but then the picture froze, and after that, it wouldn't turn on anymore and there's no sound either."

the fact your wearing gloves tells me your an amateur

That worked! I bought annold but very high end player. Tested it, worked. Came home, didn’t work anymore. I guess the car ride was the final straw. Bumped up the laser voltage just a tiny bit: works perfectly now! Thanks for this tip!

Awesome! So how do I set my multimeter? I’m a newbee

please share schematic "mines dead"

Thanks for your video

Nice job on this video. I actually don’t have power so maybe I have more issues. But I am going to do what you just did and see if that can do it. Thank you.

I fixed my TV because of this video. Thank you!

At 2:50 in “trimmer pots for the laser diode.” Nice! After watching 3 other videos this fixed my Sony CDP-211 - thanks!!

my samsung tv won't turn on red light blinking all the time , but when i unplug the one connect cable my tv turns on that i have to plugin the cable , do you think its the same problem in your video or do you think it's the samsung one connect box next to my tv ?

THANK YOU SO MUCH!!! I have ZERO experience in these kind of things and I could fix my discman all thanks to you!!!😭😭😭 It wasnt hard AT ALL, now I can listen to my taylor swift cds😭😭

My rotary belt had come off. I put it back on and ordered a replacement in case it breaks. The error message, just said ERROR and it sounded like something was just spinning. I am amazed such a little rubber belt turns the whole tray around! Thank you for saving my 20 year old disc player!!!!

Thanks! This was AMAZING. My rotary belt had come off! Put it back on and it worked!!! Ordered a replacement on Amazon if it breaks.

In my aiwa XP-V731 I can't remove the screws. Some idea?😅

It is normal that power on off 3.2V be? With the main board it is 3,2v and wothout it connected it is 3,8v. Is that normal?

mine just stopped charging after it discharged completely on using. after failed attempts to charge it i discovered two cells have completely no charge and are behaving like they are shorted coz power seems to flow from the ones next to them just through them like they are just conductors. the battery is the 18v core pro 12ah type. any advice for boss

I have those excat lights all 16 are very bright

I replaced the main board and it was still broken. But the guy who sold me the part told me to take the wide white cable out of the main board (as this is the cable to the display panel) and see if your TV turns on. My TV was constantly power cycling with a black and blue screen. I removed the white cable, turned the TV on and I heard audio from my TV. Do this step before you buy any new parts. If your tv turns on after removing the cable for the display panel then it’s the panel itself that’s broken, everything else is working. Not too sure if it’s worth replacing the panel though, maybe if you can find a cheap one, but I found it too hard to find.. Might just have to buy a new TV, or buy a 2nd hand one of the exact same model and move your main board to the new TV, so that you retain all the saved data.

Hi . I did encounter this 'not opening' of the tray with a Philips CD dvd playher /recorder and noticed that it has no problem opening when a cd or dvd is left in it when turning it off for the next time using it . At the local repairshop I was told that the magnet centering the discs is too strong . That is maybe sounding a little strange because normally ( in my expeience anyway )magnets are getting weaker over time . Maybe somebody can clear this out and even has a solution to possibly fix this ?

Hi, I have an Un48J5570, it does not turn on and if i try to unplug the cable on the mainboard, there aren't any lights.. The tv seems completly dead, is there anything i can do? Are there lights on every Samsung TV? Thx

Bought the same unit 24 years ago. Recently I transported with a disk, came loose inside And jammed, since then, it's not working correctly. Will try the steps in your video. Are the belts for the c? D drive very specific or generic. Greatly appreciate your tutorial.Gave you a thumbs up and Is subscribed. Paid about $400 or so back in 2000 I figure it's gonna cost around 1500 to get the same sound quality. Thanks again for your help